Featured

The Hybrid Precision Pack:
• 1× Neeve Knife Co. Stone Container
• 6× Hybrid Diamond Stones: 160, 285, 550, 1,100, 3,000, and 5,000 Grit

Add a Hybrid Diamond 80 or 10,000 Grit stone to complete the set here

The Hybrid Diamond Sharpening Stone is engineered for those who demand the best edge possible. Built with advanced Hybrid Bond Technology, it blends diamond abrasives with a proprietary mix of resins and non-ferrous metals. Delivering fast, consistent cutting action across every steel type, from carbon to high-alloy stainless. The stones are finished with our exclusive NKC Burnt Steel color backing, these stones feature a rugged, heat-worn tone that reflects the durability and performance they’re built to deliver.

Designed for both professionals and dedicated enthusiasts, this stone achieves exceptional precision and a refined finish while maintaining remarkable wear resistance. Its unique bonding creates fine micro-serrations that enhance cutting performance and edge retention, reducing the need for frequent dressing or replacement. Built to last and designed for results, the Hybrid Diamond Stone is the foundation of a truly professional sharpening setup.

Key Features and Benefits
Exceptional Cutting Efficiency:
• Effective on both soft and hard steels, including high-HRC powder steels.
• Delivers aggressive cutting action while maintaining high precision and control.
Hybrid Bond Technology:
• Forms micro-serrations on the edge for superior sharpness.
• High resistance to wear reduces the frequency of dressing.
• Ensures consistent sharpening performance throughout the stone’s lifespan.
Durability and Longevity:
• Lasts 2-4 times longer than phenolic stones.
• Comparable in durability to copper-based sharpening stones.
Outstanding Sharpening Results:
• Creates a cleaner, more refined surface during initial sharpening stages.
• Works effectively in dry conditions or with lubricants like oils or emulsions.
Easy to Maintain and Clean:
• Simple cleaning with oil or damp wipes.
• Can be dressed easily to restore cutting performance.
Stone Size:
• 1" by 6" by 9/32″

Keep your sharpening plates safe, secure, and ready to go with our custom stone holder container. Designed to hold up to six 1" x 6" sharpening stones or plates, this compact case is the perfect solution for storing your gear at home or taking it with you on the move.

Features:
• Secure Capacity: Holds up to six 1" x 6" sharpening stones or diamond plates.
• Protective Design: Keeps your plates organized and protected from damage or wear during storage or travel.
• Durable Construction: Built to last with USA sourced PETG plastic, tough enough for everyday use.
• Compact & Efficient: Slim, space-saving form that fits easily into a gear bag, toolbox, or drawer.
• Made in USA

Whether you're a serious sharpener or just getting started, this holder makes it easy to manage your setup and protect your investment. *Stones not included*

The Hybrid Bond Diamond Sharpening Stone is built for those who demand precision, consistency, and long-term performance. Featuring true diamond abrasive set in an advanced hybrid bond, this stone delivers fast, controlled cutting with a refined scratch pattern across a wide range of steels.

The hybrid bond is a carefully engineered blend of resins and metallic components, designed to strike the ideal balance between cutting performance and durability. It behaves closer to a softer bond for improved polishing and feedback while maintaining higher wear resistance than traditional resin-bond stones. The result is a stone that cuts efficiently, finishes cleanly, and holds up over time.

Diamond abrasives provide aggressive material removal and deep cutting ability, making this stone highly effective for everything from reprofiling to refining edges.

The larger 3" x 8" format offers increased surface area for improved stability, smoother stroke consistency, and greater efficiency, making it ideal for freehand sharpening and larger blades.

Each stone is mounted to a newly designed 3D-printed, high-strength plastic base. The updated base provides dependable support and rigidity while reducing the overall weight by approximately 50%, making the stone easier to handle, transport, and store without sacrificing stability during sharpening.

Whether you're working on everyday users or high-HRC powder steels, this stone delivers consistent, reliable performance.

Want to see how these stones perform in real use?
Check out Jerad’s full breakdown and demonstration to see the cutting speed, scratch pattern, and real-world results here

Key Features and Benefits:

True Diamond Abrasive:
• Uses diamond abrasive for aggressive, consistent cutting
• Excellent for a wide range of steels, including high-alloy and high-HRC blades
• Delivers deep, efficient material removal

Hybrid Bond Construction:
• Advanced hybrid bond blends polishing ability with increased durability
• Provides smoother scratch patterns compared to harder metal bonds
• Offers improved wear resistance over traditional resin-bond stones

Balanced Cutting & Finishing:
• Cuts fast while maintaining a controlled, refined edge finish
• Produces consistent scratch patterns for predictable progression
• Ideal for both shaping and edge refinement stages

Lightweight High-Strength Base:
• Mounted to a durable 3D-printed, high-strength plastic base
• Approximately half the weight of the previous base design
• Easier to handle, transport, and store
• Maintains dependable rigidity and stability during sharpening

Durability and Longevity
• Higher wear resistance than soft resin-bond stones
• Maintains performance over extended use with minimal maintenance
• Designed for long-term reliability in professional and enthusiast setups

Versatile Use:
• Effective across carbon steels, stainless steels, and powder steels
• Can be used dry or with light lubrication (oil or emulsion)

Easy Maintenance:
• Simple cleaning with oil, water, or a damp wipe
• Can be conditioned if needed to restore optimal cutting performance
• Size: 3" x 8" x 45/64"

The Hybrid Bond Diamond Sharpening Stone is built for those who demand precision, consistency, and long-term performance. Featuring true diamond abrasive set in an advanced hybrid bond, this stone delivers fast, controlled cutting with a refined scratch pattern across a wide range of steels. Finished with our exclusive NKC Burnt Steel color backing, these stones feature a rugged, heat-worn tone that reflects the durability and performance they’re built to deliver.

The hybrid bond is a carefully engineered blend of resins and metallic components, designed to strike the perfect balance between cutting performance and durability. It behaves closer to a softer bond for improved polishing and feedback, while maintaining higher wear resistance than traditional resin-bond stones. The result is a stone that cuts efficiently, finishes clean, and holds up over time.

Diamond abrasives provide aggressive material removal and deep cutting ability, making this stone highly effective for everything from reprofiling to refining edges. Whether you're working on everyday users or high-HRC powder steels, this stone delivers consistent, reliable performance.

Key Features and Benefits:

True Diamond Abrasive:
• Uses diamond abrasive for aggressive, consistent cutting
• Excellent for a wide range of steels, including high-alloy and high-HRC blades
• Delivers deep, efficient material removal

Hybrid Bond Construction:
• Advanced hybrid bond blends polishing ability with increased durability
• Provides smoother scratch patterns compared to harder metal bonds
• Offers improved wear resistance over traditional resin-bond stones

Balanced Cutting & Finishing:
• Cuts fast while maintaining a controlled, refined edge finish
• Produces consistent scratch patterns for predictable progression
• Ideal for both shaping and edge refinement stages

Durability and Longevity:
• Higher wear resistance than soft resin-bond stones
• Maintains performance over extended use with minimal maintenance
• Designed for long-term reliability in professional and enthusiast setups

Versatile Use:
• Effective across carbon steels, stainless steels, and powder steels
• Can be used dry or with light lubrication (oil or emulsion)

Easy Maintenance:
• Simple cleaning with oil, water, or a damp wipe
• Can be conditioned if needed to restore optimal cutting performance
• Size: 1" x 6" x 9/32"

The Shiv is Neeve Knife Co.’s first fixed blade, and it shows up like it has something to prove. Compact, precise, and purpose-built, this 6.2-inch performer is everything you’d expect from Jerad Neeve’s design language brought into a fixed blade format.

A 2.6-inch Nitro-V blade, heat treated to 62 HRC, gives the Shiv impressive edge retention while still offering the toughness you want in a blade. The hollow-ground harpoon profile adds slicing performance with a bit of attitude, paired with a belt-satin finish that keeps things clean and functional.

Natural brown canvas micarta scales bring that warm, grippy feel that gets better with age, secured with peened brass pins for a classic, no-nonsense look. The Shiv rides in a custom-fit Kydex sheath with a soft belt loop, giving you multiple carry options without adding bulk.

Handmade in the USA by Waxed Wing Knives, this is a fixed blade that punches way above its size. Whether you’re opening boxes, breaking down materials, or running it as a lightweight EDC companion, the Shiv is designed to disappear on the belt and shine in the hand. Additional Shiv releases are scheduled.

All Shiv blades are hand sharpened by Jerad. Check out the Shiv video here

Specifications:
• Model: Neeve Knife Co. Shiv
• Overall Length: 6.2”
• Blade Edge: 2.6”
• Blade Material: Nitro-V at 62 HRC 
• Blade Thickness: 0.094"
• Blade Grind: Hollow Ground Harpoon
• Finish: Belt-Satin
• Edge Type: Plain
• Handle Material: Natural Brown Canvas Micarta
• Hardware: Peened Brass Pins
• Weight: 2.25 oz
• Sheath: Kydex Sheath with Soft Belt Loop
• Knife Type: Fixed Blade
• Designer: Jerad Neeve
• Manufactured: Waxed Wing Knives
• Country of Origin: USA

Designed with precision and purpose, the Neeve Knife Co. Aluminum Maintenance Tray is the ultimate companion for knife and tool maintenance. CNC-machined from a solid block of aluminum, this tray keeps your workspace clean, organized, and efficient, so you can focus on the details that matter.

Features:
• Magnetic Bit Zone: Embedded magnets in the top section keep small bits and metal components secure and within reach.
• Driver Posts: Two dedicated posts provide a stable resting place for your drivers.
• Oil & Loctite Holders: Three precision-cut slots are perfect for holding bottles of lubricant, Loctite, or cleaning fluids.
• Removable Storage Cups: Two removable aluminum containers help manage loose screws, washers, or any other small parts.
• Minimalist & Functional Design: Everything you need, nothing you don’t.
• Made in USA
• Length: 12"
• Width: 8"
• Height: 0.6"

Whether you're tuning a folding knife, maintaining your tools, or doing a full teardown, this tray helps you keep track of every part, no more chasing runaway screws across the bench. Built tough, made to last, and crafted for knife people, by knife people.