New Arrivals

The Neeve Knife Co. MISDEMEANOR CLASS B is an updated take on the original MISDEMEANOR, built around premium materials, refined details, and the versatile deployment that made the original design a favorite.

The MISDEMEANOR CLASS B features a K390 blade heat treated to a 63+ HRC, paired with a titanium handle and multiple deployment options including a front flipper, thumbstud, and opening hole. A machined diamond-grid texture on the show side adds grip and character while keeping the lock side clean and streamlined. Titanium hardware, a milled titanium reversible pocket clip, titanium backspacer, and T8 hardware round out the build with durability and premium fit and finish throughout.

Designed by Jerad Neeve and produced by Reate, the MISDEMEANOR CLASS B takes the foundation of the original design and pushes it further with upgraded materials, refined construction, and hard-use performance built for everyday carry.

The Hotwire Anodized variant is a pre-order exclusive, with each knife individually serialized. This exact MISDEMEANOR CLASS B configuration is a one-time release and will not be produced again.

Check out the video here:  MISDEMEANOR CLASS B PRE-ORDER VIDEO

Available Variations

• Satin Blade / Blue Anodized Handle / Satin Hardware
• Black Satin DLC Blade / Bead Blasted Handle / Black Satin DLC Hardware
• Black Satin DLC Blade / Black Satin DLC Handle / Mint Green Hardware
• Stonewashed Blade / Hotwire Anodized Handle / Stonewashed Hardware
  
  

Key Features

•    Updated MISDEMEANOR CLASS B configuration
•    K390 blade steel
•    63+ HRC
•    Belt-satin, Stonewashed, and Black DLC blade options
•    Titanium handle construction
•    Machined diamond-grid texture on show-side handle
•    Titanium pocket clip with diamond-grid texture
•    Titanium backspacer, button, pivot and screws
•    T8 pivot/screw hardware
•    Four variant finish options

Knife Specs

Model: MISDEMEANOR CLASS B
Lock Type: Button Operated Exposed Liner Lock
Blade Steel: K390
Hardness: 63+ HRC (DLC ~1 HRC lower)
Blade Shape: Sheepsfoot
Blade Grind: Deep hollow grind
Blade Stock Thickness: 0.090 in
Blade Finish Options: Belt-satin, Stonewashed, and Black DLC
Handle Material: Titanium
Handle Texture: Machined diamond-grid texture on show side; no pattern on lock side
Opening Methods: Front flipper, removable thumb studs, and opening hole
Detent: Detent post
Overall Length: 7.5"
Blade Length: 3.25"
Handle Length: 4.25
Weight: 3.4 oz (prod. may be less)
Liners: Stainless steel
Stop Pin: Internal stop pin
Hardware: Titanium screws, pocket clip, pivot/button hardware, and backspacer; stainless-steel liner/lock bar
Screws: T8 Torx
Pocket Clip: Reversible titanium clip with machined diamond-grid texture, mounted to the backspacer
Backspacer: Titanium with jimping

Please Note: Product images shown are computer-generated renderings. Final production knives may vary slightly in design, color, finish, and appearance due to lighting, screen settings, material finishes, and the production process. These small variations are normal and are not considered defects. Exchanges or returns will not be accepted for minor color, finish, or appearance differences.
Hardness Note: For coated blade models, the final hardness will typically be about 1 HRC lower due to the coating process.

Machined for stability and consistency, the Aluminum & Leather Strop is built for users who want absolute control during final edge refinement. The handle is CNC-machined from 6061 aircraft-grade aluminum, giving it a substantial, premium feel in hand and exceptional flatness across the stropping surface. The added weight helps the strop stay planted, allowing for steady, repeatable passes without flex or chatter.

The stropping surface uses vegetable-tanned cowhide leather, bonded with industrial-grade adhesive for long-term durability. It’s sized for real sharpening workflows, and is optimized for diamond emulsion compounds, like Stroppy Stuff. When the leather eventually wears, it can be cleanly peeled off and replaced, extending the life of the strop indefinitely.

Thoughtful handle geometry keeps your fingers safely away from the blade edge while stropping, making this a reliable choice for both experienced sharpeners and those refining their technique. Built to last, built to perform, and built to stay flat.

Check out Jerad's video, How to Strop Like a Pro here

Cleaning & Maintenance

If you plan to switch compounds or if the strop becomes contaminated, cleaning is recommended to maintain consistent performance.

Start by wiping the leather surface with a paper towel to remove excess compound. For deeper cleaning, a white vinyl eraser can be used to lift most remaining compound and is safe for the leather.

If additional cleaning is needed, 70% isopropyl alcohol may be used sparingly. Lightly spray the alcohol onto a towel and gently wipe the leather surface.

Do not soak the strop. Allow the leather to fully air dry before applying a new compound.
Do not soak the strop in water.
Do not use harsh solvents such as acetone, brake cleaner, or lacquer thinner, as these will damage the leather and adhesive.

Proper care will extend the life of the leather and ensure reliable stropping results over time.

Size:
Length: 7.8"
Width: 1.9"
Weight: 18.2 oz

Keep your sharpening plates safe, secure, and ready to go with our custom stone holder container. Designed to hold up to six 1" x 6" sharpening stones or plates, this compact case is the perfect solution for storing your gear at home or taking it with you on the move.

Features:
• Secure Capacity: Holds up to six 1" x 6" sharpening stones or diamond plates.
• Protective Design: Keeps your plates organized and protected from damage or wear during storage or travel.
• Durable Construction: Built to last with USA sourced PETG plastic, tough enough for everyday use.
• Compact & Efficient: Slim, space-saving form that fits easily into a gear bag, toolbox, or drawer.
• Made in USA

Whether you're a serious sharpener or just getting started, this holder makes it easy to manage your setup and protect your investment. *Stones not included*

The Hybrid Bond Diamond Sharpening Stone is built for those who demand precision, consistency, and long-term performance. Featuring true diamond abrasive set in an advanced hybrid bond, this stone delivers fast, controlled cutting with a refined scratch pattern across a wide range of steels. Finished with our exclusive NKC Burnt Steel color backing, these stones feature a rugged, heat-worn tone that reflects the durability and performance they’re built to deliver.

The hybrid bond is a carefully engineered blend of resins and metallic components, designed to strike the perfect balance between cutting performance and durability. It behaves closer to a softer bond for improved polishing and feedback, while maintaining higher wear resistance than traditional resin-bond stones. The result is a stone that cuts efficiently, finishes clean, and holds up over time.

Diamond abrasives provide aggressive material removal and deep cutting ability, making this stone highly effective for everything from reprofiling to refining edges. Whether you're working on everyday users or high-HRC powder steels, this stone delivers consistent, reliable performance.

Key Features and Benefits:

True Diamond Abrasive:
• Uses diamond abrasive for aggressive, consistent cutting
• Excellent for a wide range of steels, including high-alloy and high-HRC blades
• Delivers deep, efficient material removal

Hybrid Bond Construction:
• Advanced hybrid bond blends polishing ability with increased durability
• Provides smoother scratch patterns compared to harder metal bonds
• Offers improved wear resistance over traditional resin-bond stones

Balanced Cutting & Finishing:
• Cuts fast while maintaining a controlled, refined edge finish
• Produces consistent scratch patterns for predictable progression
• Ideal for both shaping and edge refinement stages

Durability and Longevity:
• Higher wear resistance than soft resin-bond stones
• Maintains performance over extended use with minimal maintenance
• Designed for long-term reliability in professional and enthusiast setups

Versatile Use:
• Effective across carbon steels, stainless steels, and powder steels
• Can be used dry or with light lubrication (oil or emulsion)

Easy Maintenance:
• Simple cleaning with oil, water, or a damp wipe
• Can be conditioned if needed to restore optimal cutting performance
• Size: 1" x 6" x 9/32"

Designed with precision and purpose, the Neeve Knife Co. Aluminum Maintenance Tray is the ultimate companion for knife and tool maintenance. CNC-machined from a solid block of aluminum, this tray keeps your workspace clean, organized, and efficient, so you can focus on the details that matter.

Features:
• Magnetic Bit Zone: Embedded magnets in the top section keep small bits and metal components secure and within reach.
• Driver Posts: Two dedicated posts provide a stable resting place for your drivers.
• Oil & Loctite Holders: Three precision-cut slots are perfect for holding bottles of lubricant, Loctite, or cleaning fluids.
• Removable Storage Cups: Two removable aluminum containers help manage loose screws, washers, or any other small parts.
• Minimalist & Functional Design: Everything you need, nothing you don’t.
• Made in USA
• Length: 12"
• Width: 8"
• Height: 0.6"

Whether you're tuning a folding knife, maintaining your tools, or doing a full teardown, this tray helps you keep track of every part, no more chasing runaway screws across the bench. Built tough, made to last, and crafted for knife people, by knife people.